Winter Village Houses — 3D Printed Christmas Village Luminaries in Matte White, Fits Fairy Lights or LED Tealights

Set the whole street glowing. These hollow, matte white village houses have crisp cut-out windows, steep gabled roofs, arched doorways, and tiny mullioned panes — the kind of snow-dusted little town that earns a spot on the mantel from the first cold night to the last. Slip a strand of fairy lights behind them or set an LED tealight underneath, and warm light pours out of every window at once, throwing soft amber squares across the shelf. Line them up as a row of neighbors, cluster them around a bottle brush tree, or scatter them down a table runner — the village grows however you want it to.

Printed in our studio in matte white PLA. The finish is soft and chalky with no plastic shine, so under warm light the walls read like fresh snow or unglazed porcelain rather than a plastic figurine. Each building is hollow with an open base, so it sits down over a light source with no assembly at all.

All three buildings stand at the same height on different footprints, so a row of them keeps one even roofline instead of a stair-step — and each still reads as its own distinct neighbor rather than one house in three sizes.

Choose your buildings:

• Large House — the broad two-story house at the center of the village, with a chimney, a dormered roof, a paneled front door, and a wide multi-pane picture window that throws the most light of the three. Size: 3.9 in tall × 3.2 in wide × 2.8 in deep (99 × 82 × 70 mm).
• Small House — the narrow gable-front neighbor, with a round rose window set into the peak, arched double doors, and two stacked rows of small paned windows. The slimmest footprint of the three, so it tucks into the tight spots on a shelf or mantel. Size: 3.9 in tall × 2 in wide × 2 in deep (98 × 52 × 52 mm).
• Chapel — the long, low building at the end of the street, with a row of arched windows down its side and a slender steeple rising behind the roofline. The widest of the three and the shallowest, so it fills a stretch of mantel without taking up much depth. Size: 3.9 in tall × 4.6 in wide × 2 in deep (98 × 117 × 52 mm).
• Set of 3 — all three buildings together, the full village, at our best price. Lined up side by side they span about 10 in of shelf, and nothing sits deeper than 2.8 in.

What's in the box: your chosen building — or all three, if you choose the Set of 3 — printed in matte white PLA.

Lights are not included. These are made to sit over a fairy light strand or a battery-operated LED tealight you already have, so a single strand can light the entire village at once.

For battery-operated LED lights only. Never use real candles, tea lights, or any open flame with these houses. Direct heat will warp, melt, or ignite the plastic.

Hand wash only, with a damp cloth. No dishwasher, and keep them out of direct sun, hot cars, and anywhere near a radiator or heat vent, since PLA softens with heat.

Every piece is printed and finished by hand in small batches, so slight variations in layer texture and finish are part of what makes yours yours.

Perfect for anyone drawn to snowy little villages, warm windows on a dark evening, putz-house nostalgia, and a mantel that glows all season long.

Not intended for direct food contact.